AT-O-MA

  CHEMICALS

 

 

 

Safety Data Sheet

 

 

1.

IDENTIFICATION OF SUBSTANCE OR PREPARATION

 

2.

COMPOSITION / INFORMATION ON INGREDIENTS

Machine Dishwashing Liquid 

Sequestrants           Water

Sodium Hydroxide   Sodium Hypochlorite

3.

HAZARDS IDENTIFICATION

 

Corrosive

Causes severe burns

Contains Sodium Hydroxide at  11 % w/w UN.1824

                Sodium Hypochlorite at 2% w/w

4.

FIRST AID MEASURES

 

Inhalation

Remove patient to fresh air.

Skin Contact

Flush with plenty of water and remove contaminated clothing and seek medical attention.

Eye Contact

Irrigate the eye with water or eye wash solution for at least 10 minutes and seek medical attention.

Ingestion

Give milk or water as a dilutent.  15 mls per kilo of body weight to a maximum of 200-300 mls and seek immediate medical attention.

Notes to Physician

Treat as symptomatic.

5.

FIRE FIGHTING MEASURES

 

Material is not flammable.  Use any suitable fire fighting medium.

6.

ACCIDENTAL RELEASE MEASURES

 

Absorb large spillages with sand or any suitable medium.  Dispose of according to local authority guidelines.  Small spillages may be flushed away with water.  Avoid washings entering water courses.  Do not allow product to enter eyes.

7.

HANDLING AND STORAGE

 

Handling

Avoid skin and eye contact.

Storage

Store at ambient temperatures.  Keep from freezing.

8.

EXPOSURE CONTROLS / PERSONAL PROTECTION

 

Respiratory Protection

Not necessary unless used in a confined space.

Hand Protection

Wear suitable gloves such as rubber or plastic.

Eye Protection

Wear goggles.

Skin Protection

Wear suitable overalls.

Occupational Exposure Limit

100% Sodium/Potassium Hydroxide.  Has an OES of 2mg/m-3 (short and long term).

9.

PHYSICAL AND CHEMICAL PROPERTIES

 

Appearance

Clear Liquid

Odour

Slightly Ammoniacal

pH

14

pH of 0.5%

12-14

Boiling Point

Not determined

Melting Point

Not determined

Flash Point

No measureable flash point

Vapour Pressure

Not determined

Relative Density

1.29 + 0.01

Solubility in Water

Soluble


M.D.LIQUID (Page 2)

 

10.

STABILITY AND REACTIVITY

 

Conditions to Avoid

Extremes of temperature

Materials to Avoid

Do not mix with acids

Hazardous Decomposition Products

Contact with hot white metals in a fire may yield hydrogen which can be a source of an explosion in a fire.

11.

TOXICICOLOGY INFORMATION

 

Skin Contact

Will cause severe burns

Eye Contact

Can cause severe damage

Ingestion

Causes severe damage to the mucous membranes and digestive system.

12.

ECOLOGICAL INFORMATION

 

High pH on dilution with water.

13.

DISPOSAL CONSIDERATIONS

 

Can be disposed by flushing away with water.  For large quantities seek advice from specialist waste disposal company.

14.

TRANSPORT INFORMATION

 

UN No

1824

IMDG

 

ICAO / IATA

ADR

Class 8

Proper Shipping Name

 

Additional Information

 

15.

REGULATORY INFORMATION

 

Symbol             Corrosive

             

               

R-phrases

 

R35

Causes severe burns

S-phrases

 

S1/2

Keep locked up and out of the reach of children.

S37 & 39

Wear suitable gloves and eye/face protection.  In case of contact with eyes rinse immediately with plenty of water and seek medical advice.

S45

In case of accident or if you feel unwell, seek medical advice immediately (show label where possible).

Additional Information

Refer to National Legislation for specific measures that may be relevant.

16.

OTHER INFORMATION

 

The information given in this safety data sheet is based on knowledge available at the time of compilation and is intended to describe the product only in terms of health and safety requirements.  It does not signify any warranty with regard to specific properties or specifications.